The non-PC portion of the setup works fine – the TV outputs 5. That didn’t do it. Going into the Playback tab of the Sound control panel, I am able to see Stereo and a “Dolby Atmos for home theater” option, but selecting the latter does not actually result in any surround sound – it’s still stereo. Was this reply helpful? Yes No. Sorry this didn’t help. Thanks for your feedback. It depends on whether your PC manufacturer HP paid for dolby digital or dts for pre-recorded movies or dolby digital live or dts connect for live game encoding.

Years ago, your previous PC came with a dvd burner which also came with a software dvd player and that allowed you to play 5. Microsoft was also generous during the Windows 7 era to give out free software dvd player. Now it is the netflix app in windows 10 that is paying for dolby digital plus so that you can hear 5.

Thanks for the reply. Shouldn’t the data going through the HDMI cable be bit-for-bit identical to whatever audio is encoded in the source file, making it the job of the device the cable is connected to to do the 5. Adding to the confusion, here is what the Sound control panel is displaying about the device the cable is connected to. It is capping the max channels at 2 despite indicating below that that it supports surround formats?

BUT it is the software on your computer to decrypt the encrypted copyrighted material in the first place. For years, people have pc’s that came with dvd burners. Microsoft also provided a free software dvd player in Windows 7. That software dvd player decrypted the encrypted dvd movie and then send the compressed 5. Netflix has movies with 5. The netflix app for windows 10 supports 5. So test your computer with your hdmi tv and hdmi receiver by playing a netflix 5. If you are unable to get 5.

That’s essentially what I’m doing by trying to play 5. Same thing, right? Thanks for following up. If the answer is that this isn’t hardware-capable of outputting 5. Choose where you want to search below Search Search the Community. Search the community and support articles Windows Windows 10 Search Community member. Instead, Windows is only outputting stereo sound. Thanks for any assistance. This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread.

I have the same question Report abuse. Details required :. Cancel Submit. Previous Next. Paul Abayon Independent Advisor. I hope this helps. Let me know how you go.

Thank you! Sincerely, Paul A. Independent Advisor. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. In reply to JosephT71’s post on May 7, In reply to Paul Abayon’s post on May 7, Independent Advisor Thanks for the reply, but none of those things worked or addressed the issue of 5. In reply to Kelev77’s post on May 7, Sure it is the job of your tv or your av receiver to decode the compressed 5.

In reply to JosephT71’s post on May 8, Hi Kelev77, Got it, thanks. Also, are you using the built-in sound card? Looking forward to your reply. In reply to Kelev77’s post on May 8, I don’t know because FLAC is not a format used in consumer electronics.

In reply to Paul Abayon’s post on May 8, Independent Advisor Thanks for following up. This site in other languages x.

Problem outputting surround sound from PC via HDMI – Microsoft Community.

 
So this is the problem, and I have found no solution to date. If it does not download automatically, please click here. I am all ears. Search the community and support articles Windows Windows 10 Search Community member. After that it was done.

Audio and Multimedia Drivers | TechSpot – Recent Posts

There are no doubts about it — Internet streaming has become a much more viable option than classic television. More and more people choose to see their favorite shows and movies over the Internet — on demand.

It is more convenient, and you can forget about all those ads interrupting you every 20 minutes. On the same note, the home theater industry keeps evolving with every new year. For this reason, the distance between computers and home cinema systems has become extremely small. These days, you can integrate your classic computer into your home cinema without too many issues. There is one problem that keeps arising, though — how to get 5. Some TVs seem to be locked on two channels, while others find it impossible to integrate the 5.

Well, these are only some illusions. There are a few good ways to integrate your computer with your home cinema system. Now, no matter what system you have, chances are playing with your settings, a little can provide a great experience. Unless you perform the following steps to set surround sound over Windows 10, you will probably benefit from a stereo output. It is the default option, even if you have already connected the hardware. There are no significant requirements, yet one of them makes the difference — the sound card should support 5.

According to Tech Radar , new computers may already have sound cards that can output 5. Older options do not. At the same time, desktops are more likely to have such support than laptops. This requirement will determine how successful you can be in this venture. Sure, you can get a new sound card for a desktop, but it is more complicated with a laptop. Assuming that your computer has a proper sound card, here are the steps to learn how to get 5. If you use Mac, it depends on what software you rely on for your home cinema experience.

Lots of people choose VLC, so here are the steps. Based on this article from Lifewire , you have to configure VLC according to the above steps, then implement it into AirPlay.

In the end, you do not need too much experience to learn how to get 5. As long as your system supports everything, a few changes in your settings should get the job done. If you are not sure about anything, this article from Lifewire will tell you how to integrate your computer into your home cinema system — assuming that it is possible. As for the actual configuration, the steps above are straightforward and intuitive, so you should have no problems at all.

Now, my team of writers and reviewers are some of the most knowledgeable and trustworthy people on the internet. Use your computer to set and control the home cinema environment. Use a smart TV or media streamer to access music and video on your computer.

Connect your computer to a home cinema system with surround sound. Use the television set as a monitor for music, games, and videos. How to get 5. Go to the sound properties. You can press the Windows key and R at the same time. A Run window will open up. Writing mmsys. Go to the playback tab and choose the device responsible for the surround sound.

Different sound cards may show different names. Click on the speakers, then press the button to set default. On the same tab, go to the configuration menu — click the configure button on the lower-left corner. A new speaker setup window will come up with audio channels.

Choose 5. In the next window, you will find a few different configurations. Choose the one closest to how you placed your speakers around the home cinema system. Look below at the optional speakers and check all the boxes, then go next. This way, the sound meant for the missing equipment will be sent to an available channel. Otherwise, it will be lost so that you will miss lots of audio.

As you go next, you will be asked to choose the full-range speakers. Many 5. Choose the ones you have and ignore the others, then go next. Click finish. How to test the new system There are a few necessary steps to verify your system before actually playing your movie.

Go to the sound properties — Windows key and R, then type mmsys. Go to the playback tab. Choose the speakers you selected before and right-click on them. You will find a button to test them. Sounds should come out from each speaker at a time, so you can tell precisely whether the entire system works or not. Right-click again and choose to stop testing once you are done. Download and install VLC if you have not already, then run it from applications.

Go to the File menu and open a file, then select the video you want to watch. Pause the video in case it starts automatically and go to the VLC menu. The name of this option can be slightly different, as it depends on what Mac type you have, not to mention the VLC version. Keep playing the video, and the audio should not go through your surround sound system.

Hit the AirPlay icon in the menu bar. You will find a menu with more options — choose Apple TV. Play your video, put it on the full screen, and enjoy it on your home cinema system with surround sound. Conclusion In the end, you do not need too much experience to learn how to get 5. Important Disclaimers Resolutionacoustics.

Important Links.